We manufacture Liquid level controls for industrial purposes. The products are
- Float-Operated Level Switches
- Cable Float Level Switches
- Cable Float Level Switches
- Aquatrol Liquid Level Controller
|
 
| Float-Operated Level Switches We offer float operated level switches with the following features. Features: - Are generally able to handle high temperature applications
- All models are factory calibrated at the switching differential of 20 MM ± 5 MM with SG–1.0
Specifications: - Material: Polypropylene, Nylon, PU
- Switch Housing : Weather Proof / Explosion Proof
- Switch Rating: 250 VAC/ 15 Amps
- Material of Construction
- Chamber: A106 Gr.B/ SS-304/ 316/ 316L
- Flanges/ Fittings: A105/182-316/316L
- Studs/ Nuts: A193-B7/A194-2H
- Studs/ Nuts: A193-B7/A194-2H.
- Switches: SPDT-1/ SPDT-2/ DPDT-1/ DPDT-2
Send Enquiry |  |  
| | Cable Float Level Switches We offer cable float level switches with following features. Features: - Switch differential is set with the help of a counterweight that can be adjusted alongside the cable of the switch
- Level switches are made up of non-toxic body materials
- Mercury free operated micro switch enable its use in drinking water applications
- Level switches for drinking water to sewerage
Specifications - Maximum Load: 15 A at 250 V AC
- Switch Angle: +/ -45°
- Cable Length: 5 meters (Extra cable length on request)
- Housing Material: Non-Toxic Polypropylene
- Liquid Density: Min. 0.8
- Contact Type: Micro switch with NO and NC contact
- Process Temperature: - 20°C to 80°C
Send Enquiry |
| Automatic Water Level Controller Features: - Suitable for jet pumps, mono block pumps, submersible pumps with single phase/ yhree phase power supply
- Fully automatic
- When water level in the overhead tank falls below the lower sensor, pump will automatically start, and keep running till water level reaches the upper sensor, and switch off the pump when tank will full
Specifications: - Main Supply: 250 VAC/ 1 phase, 50 Hz
- Operating Voltage: 24 VDC
- Max. Load: 10/ 25 Amp
Send Enquiry | |
| | Miniature Level Switch  J.K. Miniature Level Switches are use for the monitoring and control of liquid levels in the vessels. These stainless steel float switches are corrosion resistant and ideal for application where smaller devices are required. Different float configurations allow for greater flexibility and cost options. These switches provide both normally open (NO) and normally closed (NC) operation. Specifications: - Temperature Range: 40ºC to 150ºC
- Pressure Range: 7, 10 & 20 KG/CM²
- Advantages: Simple installation, long electrical service life due to sealed contact.
- Reed Switch: Sealed in Glass, under an inert gas atmosphere, contacts are protected from contamination
- MOC: SS-304/316
- Float Guide: SS-304/316
- Process Connection: ¼ - ½ NPT/BSP, ½ NPT/BSP threaded
Send Enquiry |
|
 
|
|
© J. K. Instrumentation. All Rights Reserved (Terms of Use)
