Liquid Level Switches

Our range of miniature level float switches are used for the monitoring and control of liquid levels in the vessels.

Salient features of our product are:

• Corrosion resistant
• Suitable for acidic environments
• Different float configurations allow for greater flexibility and cost options
• Provide normally open (NO) or normally closed (NC) operation
• Contacts are protected from contamination
• End connection screwed/ flanged as per requirements of the customers
• Used for the monitoring and control of liquid levels in the vessels

The specifications of our products are:

• Materials used in construction are polypropylene, nylon, PU
• Temperature range of 40 to 120° C
• Pressure ranges of 35 : 7, 10 & 20 kg/ cm²
• MOC: Float
• Float guide of polypropylene, nylon, PU process
• Available connections are of ¼”-1/2” NPT/ BSP, 1/2”NPT/BSP threaded

Following are the advantages of our products:

• Simple installation
• Long electrical service life due to sealed contacts
• Reed switches, which are used “hermetically sealed-in-glass”,under an inert gas atmosphere.

We manufacture cable float switches, which are available in various range of temperature, liquid density etc. Some of the features of our products are:

• Switch differential is set with the help of a counterweight that can be adjusted alongside the cable of the switch
• Level switches are made up of non-toxic body materials
• Mercury free operated micro switch enable its use in drinking water applications
• Level switches for drinking water to sewerage

The specifications of our range are:

• Maximum Load capacity of 15 A at 250 V AC
• Switch Angle: +/ -45°
• Cable length of 5 meters and provides extra cable length as per the requirement
• Housing material of non-toxic polypropylene
• Liquid density of minimum 0.8
• Micro switch with NO and NC contact
• Process temperature of 20°C to 80°C

Our range of side mounted float operated level switches are used for heavy fuel oil, sewage tanks, fresh water tanks etc. Further, some of the features of our products are:

• Designed for integral mounting
• Can also be vertical mounted with angle type float stem

The specifications of our range are:

• End connection of flanged/ screwed
• Switch housing, which are weather proof / explosion proof
• Switch rating, ranges of 250 VAC/ 15 Amps
• Construction material are wetted parts: SS-304/ 316/316L/ PP, float: SS-316/ 316L and switches: SPDT /DPDT.

We offer two ranges of fuel sensors, 'FS-01 (Low Level) and FS-02(High & Low level) Series. Our sensors are fully custom designed to your requirements. Our standard design, available at any custom length Features Specifications: Vertical fuel level sensor is of high reliability and is widely applicable to various fuel tank. Fuel low level alarm system is integrated in this part. Material: Stainless Steel tube, Float:PU, operating in the vertically direction Sensing length : Customized.

Level Switch for drinking water to sewerage. Switch differential is set with the help of a counterweight that cab be adjusted alongside the cable of the switch. Our Level Switches are non-toxic body materials and mercury free operated micro switch enable its use in drinking water applications.